Electric magnetic lock (door lock) control - OPEN.ioting Power+
On the following page you will find the wiring information for two different types of magnetic locks when installing the OPEN.ioting Power+ device:
Connection for magnetic lock with lock state indicator microswitch
Connection for magnetic locks without a lock state indicator microswitch.
In the case of an electric lock without a microswitch, the microswitch can be replaced with a magnetic door opening sensor with an NC/COM terminal.
Would you like to know more about controlling the electric magnetic lock (door lock)?
Read the frequently asked questions below. In our experience, you will find a solution to 95% of the problems, but if not, our Technical Support colleagues are always at your disposal.
Do you have any further questions?
T.E.L.L. Biztonságtechnikai Rendszerek Kereskedelmi és Szolgáltató Kft.
Address: 4034 Debrecen Vágóhíd Street 2.
Phone: +36 52 530 130
Technical support: +36 1 533 31 20
If you have any questions about our products or services, or would like to initiate a collaboration, please contact us with confidence. Our colleagues are at your disposal and will be happy to help with any needs or problems that arise.
* By sending this message, I accept and consider the data processing policy to be binding.