The current guide describes the operation of version 1.6.0. The geolocation opening function is currently under testing, therefore its operation is not guaranteed to be error-free and its reliability may vary. In addition, we would like to draw your attention to the fact that the texts appearing on the user interface may also change. Please use the function below with this in mind. We look forward to your suggestions and comments attermektamogatas@tell.hu . Thank you for your cooperation in helping us with our work!

Geolocation opening allows gates to open automatically when the user arrives at a specific geolocation area, i.e. a preset physical location identified by the user's mobile device based on GPS data.

• Set the geolocation opening function separately for each gate !
• The setup must be done in each mobile app , as the data is stored on the phone for GDPR reasons.
• Always allow location for the app. If you disable it, the auto-open feature will not work properly.

• Enter the Device Setup menu.
• Tap the Geolocation-based unlock (BETA) button.
• Enable the " Allow opening " button. This will enable the feature.
• The Setup Wizard starts automatically the first time you use it. The wizard informs you and guides you through the settings.

• Enter the size of the area centered around your gate. We recommend 1000 meters as the default setting.
• The exact location is marked by the center of the crosshair, which you can specify by zooming and moving the map.

Enter the first area (circle with radius) that you must pass through to start the process. Touching this point does not automatically open the door, it will only open when you touch the second (activation point).

Enter the second area (circle with radius) that you must definitely pass through for automatic opening to begin.

Important! The entry and activation points cannot overlap! This is necessary to determine the direction of travel. Furthermore, the gate will only open automatically if you first pass through the entry point and then the activation point. It does not work the other way around!

• A menu called " Wizard Point Pair " has appeared under "Sensing Point Pairs". Here you will find the previously set geolocation points. By clicking on the name, you can change the name of the point pair (e.g. Home instead of Wizard Point Pair), and modify the entry and activation point again.

• In the “ Maximum passage time ” menu, enter the time interval (in seconds) during which, if the activation point (OUT) is not reached, automatic opening will not be activated.

• You can add additional geolocation points in the application under the “ Sensor point pairs / New sensor point pair ” menu item.

• Allow - if you do not want geolocation to open automatically. When you enter the specified geolocation range, a push notification will appear, allowing you to allow or deny automatic opening.

• Do not enable (leave as default) – if you want to open the gate automatically. In this case, click the "Delay opening command" button below and enter the passage time interval. During this time, you can interrupt the automatic opening of the gate.

You can also download the material explaining how geolocation unlocking works in PDF format by clicking HERE .